Measuring and drawing
Before you draw anything

Measuring and drawing your site: a base plan you can design on

A measured drawing at a stated scale, with the house, the hard surfaces, the trees, the meters and the marked utility lines on it, and the deed read rather than assumed.

Start here Essentials

A base plan is a measured drawing of what is there now. For one bed it is a single sheet of graph paper and half an hour. The 811 call is the step that cannot wait, because the notice period is counted in business days.

  1. Measure the edges and the distances to fixed things. Length, width, and how far the area sits from the drive, the house and the boundary (section 3).
  2. Draw it to a stated scale on graph paper, and write the scale on the sheet (section 5).
  3. Call 811, then mark what they mark on your drawing. Planting a shrub counts as digging (section 7).
  4. Add the fixed things you will have to live with: the downspout, the spigot, the meter, the overhang, anything on the boundary (section 6).

Minimum time: about 45 minutes outdoors and 20 minutes drawing, plus the days you wait for the locators. Done when: you have a drawing with every edge dimensioned, a scale written on it, and the utility marks copied onto it.

1. What a base plan is, and why nothing works without one Understand

A base plan is a scaled drawing of your site as it is: the boundaries, the house, the hard surfaces, the things that are not moving, and anything buried that you need to keep away from. It is drawn from above, like a map. It carries no design decisions whatever, which is exactly what makes it useful, because every design decision after this gets tested on it.

Every publication read for this manual starts here. NC State Extension's six steps begin with the base plan and site inventory. Mississippi State Extension's seven steps begin with developing a base plan, and describe it as a simple scaled drawing from a bird's-eye view that accurately locates property lines, house, drives, walks, fences, utility lines and existing trees. Oklahoma State Extension and Alabama Extension both begin the same way. Convention When four extension services with different climates and different audiences all open with the same instruction, it is reasonable to treat it as the settled first move rather than a preference.

What the base plan buys you is arithmetic. On a drawing at a known scale, a question like "does a table for six fit between the door and the tree" is answered by measuring the paper rather than by standing in the yard squinting. The same drawing answers "how many plants" in Drawing the planting plan, because a plant drawn as a circle at its mature spread either overlaps its neighbor or does not. Without a scale, nothing on the sheet means anything, and the drawing becomes a doodle with aspirations.

The second thing it buys you is memory. Six months into a project the base plan is the only record of what the site was like before you started moving things, which matters when you discover that the gravel you spread is sitting over the cleanout.

Limits

A base plan is not a land survey. The boundary you measure with a tape is where you believe the boundary is, and belief is not a legal position. Only a licensed land surveyor establishes a property line, and the difference matters the moment you site a fence, a wall, a hedge or anything else a neighbor could later ask you to move. Mississippi State Extension's own advice is to call a registered land surveyor if you have difficulty verifying your property lines. If a boundary decision is involved, get it surveyed; this drawing does not settle it, and neither does the fence that is already there.

2. Finding the drawing that already exists

Before measuring anything, look for a drawing that already exists. A plat is a recorded map of how land is divided, showing lot lines and often easements; a plot plan or site plan shows the buildings on the lot. Mississippi State Extension notes that depending where you live, a plat may have been among the papers you received when you bought the house, and if not, the city or county assessor's office may have one. While you are there, that publication suggests requesting a copy of local ordinances on easements, height restrictions, building codes and anything else that affects a landscaping project. Many counties now publish a GIS map online where you can see the lot outline without leaving the house.

What those documents give you that a tape measure cannot:

On the documentWhat it isWhy it changes the design
Property linesThe recorded boundary of the lotWhere your ground stops, which is often not the fence
SetbacksA required distance from a line within which you may not buildRules out structures in a strip you were counting on
EasementsSomebody else's right over part of your landAnything you plant or build there can be removed to reach what is underneath
Rights of wayA strip, often along the street, held for public useNC State Extension points out that most property boundaries do not reach the road; a plant or a wall in the right of way may be torn out
Recorded dimensionsLot dimensions as filedA check on your own tape work; if they disagree by a lot, something is wrong

The right-of-way point is worth sitting with. The strip of ground between the sidewalk and the curb, which almost everyone treats as theirs, is frequently not. Ask the authority Who owns it, what may be planted there, and whether the city may remove it are three separate questions, answered by your municipality and not by your neighbors' practice.

3. Measuring: tape, helper, order

You need a long tape. Mississippi State Extension suggests a 50- or 100-foot tape measure, pencils, erasers and a clipboard, and notes that a measuring wheel may suit you better. NC State Extension says a 100- to 200-foot tape measures most things in an average yard. Convention A second person is worth more than any tool: Mississippi State's publication suggests that if you have no help, you put a long screwdriver through the loop at the end of the tape and into the ground to hold it.

The order that keeps mistakes out:

  1. Sketch first, freehand, not to scale. Walk the site and draw everything roughly, with plenty of space between things. You are making somewhere to write numbers, not a drawing.
  2. Measure the house. Along the wall, wall face to wall face. Mark every door and window with its width and where it sits along the wall, and note how high each sill and threshold is above the ground, because a door that opens over a planned bed is a bed that dies.
  3. Measure the boundaries, each run, and note what forms it: fence, wall, hedge, nothing.
  4. Measure the hard surfaces. Drive, walk, patio, steps, with their widths.
  5. Measure from fixed things to everything else. Two measurements from two known points fix any object (section 4).
  6. Measure the curves. Mississippi State's method: lay a tape, a hose or a string line along the straight baseline, then measure out to the curved edge every 3 feet, which leaves you a series of dots on the plan that you join up.

Record as you go, on the sketch, in ink. The commonest failure in this whole chapter is measuring eleven things and remembering nine of them by the time you are back indoors. The second commonest is a single transposed digit, which is why the next step is a check: add up the individual runs along one side and compare the total with one long measurement of the whole side. If they disagree by more than an inch or two, something is wrong, and finding out now costs five minutes.

Go deeper

Measuring an irregular or sloping site

For a lot that is not a tidy rectangle, use offsets: run a single straight baseline the length of the site, measure along it, and at each point measure out at a right angle to whatever you are locating. Every feature then has two numbers, "42 feet along, 7 feet out," and the drawing is a matter of plotting points. It is slower than measuring object to object and far harder to get wrong.

On sloping ground a tape held along the slope measures the slope, not the ground plan, and everything drawn from it comes out too long. The fix is to hold the tape level and drop a plumb line, or to measure in short level steps down the slope. For a gentle slope over a short distance the error is small enough to live with; over a long or steep run it is not, and this is one of the places where a base plan quietly stops being accurate. Water, drainage and slope covers measuring the slope itself.

4. Locating a tree by triangulation

A tree is the hardest thing on a site to place, because it is round, often in the middle of nothing, and more important than anything else on the drawing. The method is triangulation, which NC State Extension gives as the standard approach: pick two fixed points you have already drawn accurately, usually two corners of the house, measure from each one to the center of the trunk, and write both numbers down.

To plot it, set a compass (or a piece of string with a pencil) to the first distance at your drawing's scale, draw an arc from the first point, then set it to the second distance and draw an arc from the second point. Where the arcs cross is the tree. Physical principle Two distances from two known points fix a third point on a plane; this is geometry, not a gardening convention, and it works for anything you cannot measure in a straight line from an edge.

Then draw the canopy, not just the trunk. Measure the spread by walking out from the trunk to the edge of the branches in two directions at right angles and averaging, or by measuring the shadow's width at midday if the canopy is too high to pace. The canopy circle is what the design has to work around, and on a small lot one mature tree's canopy is frequently more than half the usable ground.

5. Choosing a scale

Scale is the whole reason the drawing works, and it needs to be stated on the sheet in words, because in six months you will not remember.

ScaleRead asSuitsSource
1 inch = 10 feetEngineer's scale; one grid square of ten-to-the-inch paper is 1 footAn average homeowner lot; a property under an acreNC State Extension; Mississippi State Extension
1/8 inch = 1 footArchitect's scaleA property under an acre, drawn with an architect's ruleMississippi State Extension
1/4 inch = 1 footArchitect's scale, four times the detail of 1/8A small property or courtyard; beds with many speciesNC State Extension; Mississippi State Extension

The practical rule is the largest scale that still fits your site on one sheet. Mississippi State Extension gives a worked example: a lot 100 by 70 feet fits comfortably on a single 8 1/2 by 11 sheet of graph paper with ten squares to the inch, at 1 inch = 10 feet. A 12-by-4-foot bed at 1/4 inch = 1 foot occupies 3 inches by 1 inch, which is small but workable; at 1/2 inch = 1 foot it is 6 by 2 inches, which is better. Convention Going smaller than 1/8 inch = 1 foot makes a planting plan nearly impossible to draw, because the plant circles become too small to label.

If the site will not fit on one sheet at a usable scale, draw it in sections, each with the same scale stated, and overlap them by a few feet so they can be aligned. Do not change scale between sheets.

The site plan tool does the same job in a browser, at a scale you choose, and prints at true size with a scale bar you can check against a ruler. It is not a replacement for the measuring; it is a replacement for the graph paper.

6. What goes on the drawing

Everything on the following list, because each item either constrains the design or will be dug into by somebody who did not know it was there. NC State Extension's inventory is the basis of this list.

  • The house footprint, with every door and window, their widths, and the height of each sill and threshold above the ground.
  • The roof overhang, drawn as a dashed line. The strip under an overhang gets almost no rain and is one of the driest places on any site; planting it as though it were open ground is a standard mistake.
  • Hard surfaces: drive, walks, patio, steps, and which way each one falls.
  • Downspouts, and where each one discharges. This is the single most useful item on the drawing for Water, drainage and slope.
  • Spigots and hose bibs, because watering through establishment is measured in hose lengths.
  • Meters, the A/C unit, the septic lid, cleanouts and manholes. All of them need access, and some of them need an engineer-sized vehicle to reach them one day.
  • Existing plants, trees by canopy circle, shrubs by spread, with a note of condition.
  • Anything on or near the boundary: fences, walls, a neighbor's tree whose branches cross, a shed built up to the line.
  • Overhead lines, with the span they cross, because they decide what may be planted beneath.
  • North. An arrow, from a phone compass. Everything in Sun, shade and wind hangs off it.

Put each item on the site survey's "What is already there" sheet as you draw it, with keep, move, remove or ask against it. NC State Extension's basis for that judgment is the plant's health, its mature size and what it contributes, and the mature size is the one people skip: a shrub that is pleasant at 3 feet and is going to be 12 is not a keep, it is a move.

7. Utilities: 811, the colors and the no-dig zone

811 is the free national number in the United States that gets buried utilities located and marked. The Common Ground Alliance, which runs it, says to contact your state's center a few business days before any digging, and names "common projects like planting trees and shrubs or installing fences and mailboxes" among the work it covers. Ask the authority Planting a shrub is digging. So is setting a post, and so is driving in a stake.

Two things about the timing. First, the notice period is set state by state, which is why this manual prints no number of days: NC State Extension's chapter says 48 hours, the national service says a few business days, and the figure that governs you is your own state's. Use the state page at 811beforeyoudig.com, which routes to your state's own center and its own rules. Second, marks fade. A call made for the survey is not a call made for the work, so call again before each phase that digs.

The marks go down as colored spray paint or flags, a different color for each utility, as NC State Extension's chapter describes. This manual does not print the code, because the key that governs your yard is the one your state's 811 center publishes, and that is the page to read before the locator arrives. Ask for it when you call, or find it on your state's page, and write the colors you were given at the top of the survey's utility sheet so that the marks on the ground and the lines on your drawing mean the same thing a month later.

What to record for each marked line, whatever your state's colors turn out to be:

RecordWhy
What kind of line it isDecides how badly you want to stay away from it, and who you call if you hit it
The date it was markedMarks fade; the date tells you whether this call still covers the work
Where it runs, measured from two fixed pointsSo the line survives on your drawing after the paint has gone
The width of the no-dig zoneSet by your state; it is the strip the design has to avoid, not just the painted line
Whether it crosses anything you plannedThis is the row that changes the design, and it is better found now

Around a marked line there is a tolerance zone in which you may not use a machine. NC State Extension describes a 5-foot zone, 2 1/2 feet either side of the mark. Ask the authority The width and the rules for digging inside it are set by your state, and the safe assumption is that anything inside the zone is hand work done carefully, where it is permitted. Draw the marked lines on your base plan with the zone shaded, and treat the shaded strip as ground you design around rather than ground you argue with.

The Common Ground Alliance's own figures put the cost of not calling in context: not contacting 811 is the top driver of damage to buried utilities, with roughly $30 billion a year in repairs and societal impacts, and while backhoes are the most common tool involved in damages, shovels are second. A hand tool is not a safe tool near a marked line.

Caution

The locators mark the utilities' own lines. They do not mark private lines: the run to a shed or a garage, an irrigation system, a buried propane line, invisible fencing, a septic line between the house and the tank. Those are yours to find, and they are frequently shallower than the utility lines. If you do not know where a private line runs, that is a reason to hand-dig a trial trench or to hire a private locator, not a reason to proceed carefully with a spade and hope.

8. The deed, the plat, the covenant and the ordinance

Four documents may constrain what you do, and none of them is findable by looking at the yard. Put each question on the survey's questions sheet with who answers it and what they said.

DocumentWhat it governsWho answers
The deedWhat you own and any conditions attached to itYour own purchase papers; the county recorder
The platLot lines, easements, rights of wayThe county assessor or recorder; often a county GIS map
Zoning and building ordinancesSetbacks, heights, fences, what needs a permitThe local planning or building office
An HOA covenantWhat may be visible, what needs approval, what is bannedThe covenant document itself, then the board
A tree ordinanceWhich trees may be removed or pruned, and by whomThe municipality, often a city forester
A leaseWhat a tenant may changeThe landlord, in writing

Ask the authority Every one of these is local. This manual does not state a setback, a notice period, a permit threshold or a height limit, because all of them are set by somebody whose jurisdiction covers your address and not the next county. What it can tell you is that the questions exist and that they are cheaper to ask now than to answer in a letter later.

The HOA case deserves its own note. A covenant usually governs what is visible from the street, which means the front yard and sometimes the sides, and approval often takes weeks. If you are in an HOA, the base plan is also the document you will submit, so draw it neatly and keep a copy.

9. See it: two base plans See it

Fictional example

Rosalind's strip, Burlington, Vermont. Known: the strip runs 12 feet along the driveway and is 4 feet from the drive edge to the chain-link fence; the house wall is 9 feet from the fence at the near end; a downspout discharges at the house end of the drive. Her drawing is one sheet at 1/2 inch = 1 foot, which makes the strip 6 by 2 inches, with the drive edge and the fence drawn as the two long sides and the downspout marked. She called 811 and the locator sprayed a yellow line running across the strip 3 feet from the fence, with the gas service to the house. Assumed: that the strip is her land, because the fence is there; this is her assumption, not a fact. Open: whether the strip lies in the public right of way along the street, which only the plat and the city answer. What it changed: the yellow line with its tolerance zone runs down the middle of a 4-foot strip, so the usable planting ground is the 1 1/2 feet on the fence side and a hand-dug strip on the drive side. That is the single most consequential thing on her drawing, and she would not have known without calling.

Fictional example

The Okonkwo back yard, Columbus, Ohio. Known: 48 feet wide by 32 feet deep, fenced on three sides; the house wall forms the fourth; a sliding door 6 feet wide, threshold 7 inches above grade, 14 feet from the west corner; a concrete pad 10 by 8 feet outside it; two downspouts, one at each rear corner of the house; a silver maple in the northwest corner, trunk triangulated at 31 feet from the west house corner and 44 feet from the east, canopy spread paced at about 44 feet. Drawn at 1 inch = 10 feet on one sheet of ten-squares-to-the-inch paper. Assumed: that the fence sits on the boundary, which they have not checked, and which matters because they are considering a screen along it. Open: whether the 2024 sewer dig left an easement recorded on the plat. What it changed: drawn at scale, the maple's canopy covers roughly a third of the yard and reaches to within 10 feet of the back door, which rules out the sunny dining terrace they had imagined under it and relocates that conversation to Beds, lawn and use areas. Under these assumptions the terrace will have to go on the east side; the fence line question, which only a survey settles, decides how far east.

10. Practice: draw the base plan Practice

Minimum: the edges of the area you are changing, its distance from two fixed things, the downspout, and the utility marks, on one sheet at a stated scale. Time: about 45 minutes outdoors, 20 minutes drawing, plus the business days you wait after calling 811. Materials: a 50- or 100-foot tape, a pencil, graph paper, a clipboard, a phone with a compass, and ideally a second person. A screwdriver stands in for the second person.

  1. Call 811 first, because the waiting is the only part you cannot compress. Mark your proposed dig area in white first if your state asks for it.
  2. Sketch the site freehand on the clipboard, big and loose, with room to write numbers everywhere.
  3. Measure and write as you go: house wall, openings, boundaries, hard surfaces, then everything else by two measurements from two fixed points.
  4. Check one side: add the separate runs and compare with a single long measurement. Resolve any disagreement before you go inside.
  5. Draw it to scale on graph paper, write the scale and a north arrow on the sheet, and date it. Then copy the utility marks on, with the tolerance zone shaded.
Go deeper

Using the plot plan's own scale

If you have a plat or builder's plan, it is already to scale, and the quickest route to a base plan is to trace the lot outline and house from it and add only what it does not show. Check it first: measure one side on the ground, compare with the same side on the document, and only trust it if they agree. Builders' plans in particular show what was intended, which is sometimes different from what was built.

Triangulation on paper, worked

Say the tree is 31 feet from the west house corner and 44 feet from the east, and the two corners are 40 feet apart. At 1 inch = 10 feet, set a compass to 3.1 inches, put the point on the west corner and swing an arc. Set it to 4.4 inches, put the point on the east corner, swing again. The arcs cross in two places, one on each side of the house wall; the one on the garden side is your tree. If the arcs fail to cross, one of the three numbers is wrong, which is itself useful information and the reason the method is worth the extra measurement.

11. Your garden Your garden

12. Check your work Check your work

Criteria

  • The scale is written on the sheet in words, and so is the date and a north arrow.
  • Every boundary run and every hard surface has a dimension on it.
  • Doors and windows are shown with their widths and the height of sill or threshold above the ground.
  • The roof overhang is drawn, as a dashed line.
  • Every downspout is shown, with where it discharges.
  • Trees are located by two measurements from two fixed points and drawn as canopy circles, not dots.
  • 811 has been called, the marks are copied on, and the tolerance zone is shaded.
  • The check measurement along one side agrees with the sum of its parts.
  • The questions sheet names who answers each of the deed, plat, setback, easement and covenant questions.

Worked example

The Okonkwo base plan (fictional) meets most of the criteria and fails one instructively. It has the scale, the date, north, dimensioned boundaries, the pad, both downspouts, the sliding door with its 7-inch threshold, and the maple triangulated and drawn as a 44-foot canopy circle. The check measurement along the back fence agreed with the sum of its runs to within an inch. What it does not have is any answer on the fence line: they measured to the fence and drew the boundary there, which is a reasonable working assumption and an unreasonable basis for siting a screen that a neighbor will see. The right handling is the one they used: draw it, label the line "fence, assumed boundary, not surveyed," and put the question on the sheet. The drawing stays useful for layout; it simply is not evidence of where the line legally falls.

Common mistakes

  • No scale written down. The drawing becomes unusable the moment you forget, and you will forget.
  • Measuring to the fence and calling it the boundary. Fences move, get rebuilt and were often put up by somebody guessing.
  • Drawing a tree as a trunk. The canopy is what the design works around.
  • Leaving the overhang off, and then planting the driest strip on the site as if it were open ground.
  • Calling 811 for the survey and not again for the work. Marks fade and the notice period restarts.
  • Assuming the locators marked everything. Private lines to sheds, irrigation and propane are yours to find.
  • Measuring along a slope. Everything comes out longer than the ground plan, and the error compounds.

What is still unresolved

  • Where the boundary legally is: a licensed land surveyor, not this drawing.
  • What the light is doing across the site: Sun, shade and wind, which hangs off the north arrow you just drew.
  • What the ground is made of and how it drains: Soil and Water, drainage and slope.
  • Whether a tree you drew is sound and worth keeping: a certified arborist.
  • What may be built, how close and whether it needs a permit: your local planning or building office.

13. Knowledge check and scenario

Why is the scale written on the drawing in words rather than just implied by the graph paper?
Because graph paper comes in different rulings, the sheet gets photocopied, and in six months nobody remembers whether a square was a foot or two. Every measurement taken off the drawing afterward, including every plant circle in the planting plan, depends on the scale being unambiguous. A drawing without a stated scale is a sketch.
What is the difference between a base plan and a survey?
A base plan is your own measured record of what is on the site, good enough to design on. A survey is a licensed land surveyor's determination of where the legal boundary is. The two look similar and do different jobs. Anything that turns on where the line actually falls, a fence, a wall, a hedge, a structure near a setback, needs the survey.
Why does this manual not tell you how many days before digging to call 811?
Because the notice period is set state by state. NC State Extension's chapter says 48 hours; the Common Ground Alliance says a few business days; your state's own center has the number that governs your address. Printing a national figure would be printing something that is wrong somewhere. The state page at 811beforeyoudig.com is the route.
The locator has been and marked the yard. Name two things that are probably not marked.
Private lines: the run to a shed or garage, irrigation pipe, invisible fencing, a buried propane line, a septic line between house and tank. The locators mark their own utilities' assets. Private lines are the owner's responsibility to find, they are often shallower, and a shovel is the second commonest tool involved in damages.
You measure 31 feet to a tree from one house corner and 44 feet from the other, and when you plot the arcs they do not cross. What has happened?
At least one of the three numbers is wrong: one of the two distances to the tree, or the distance between the corners. Arcs that fail to meet are the method telling you so, which is why triangulation is worth the second measurement. Go back out and measure again rather than fudging the position.
(Go deeper) Why does measuring along a slope produce a drawing that is too big?
A plan is a view from above, so it shows the horizontal distance. A tape held along sloping ground measures the hypotenuse, which is longer. Everything drawn from slope measurements comes out stretched, and the error grows with the steepness and the length of the run. Hold the tape level and plumb down, or measure in short level steps.
Scenario: you have your tape, a free Saturday and a clear idea of a new bed along the back fence. The locators cannot come until Thursday. What do you do on Saturday?
The premise is wrong: the Common Ground Alliance says some utilities are buried just inches below the surface, and shovels are the second most common tool involved in damages to buried lines. Depth is not something you can assume, and planting is explicitly named as work the service covers. Beyond the safety question, in most states digging without notice has legal consequences and you own the repair.
This is the sound path and it wastes nothing. The measuring and drawing is a full Saturday's work on its own and does not touch the ground; marking the proposed area in white is what the locators ask for in many states; and by Thursday you will know whether the bed you drew is sitting on a service line, which is a far better moment to find out than halfway through. What it leaves open is the boundary itself, which the fence does not settle.
A trial hole is still digging, and one hole tells you about one spot. If there is a genuine need to know what is underground before the locators come, that is a case for a private locator, not for a spade. The sound version of this instinct is to hand-dig carefully after the marks are down, inside the rules your state sets for the tolerance zone.

Checklist

Records your learning only; it is not a qualification.