Quick start: design one bed this weekend
Start here

Quick start: design one bed this weekend

The smallest honest version of this whole manual, on one page: measure the bed, call 811, read the sun for a day, test the drainage, pick five plants that match, draw them at mature size, count them, buy that many, plant and mulch.

This page is for one bed or border, not a whole yard, and it is written so that somebody with a free weekend and no experience can finish with a planted bed that will still be right in ten years. It is also honest about what it is skipping: a brief, a use plan, hardscape, phasing. Those matter and they are not needed for one bed.

One thing cannot be compressed. The 811 call has to go in first, because the notice period is counted in business days and it is set by your state. Make that call at the start of the week and everything else fits into the weekend.

Earlier in the week

  1. Call 811, or use your state's online form. Planting a shrub counts as digging, and the Common Ground Alliance names planting trees and shrubs among the projects the service covers. Use the state page at 811beforeyoudig.com, because the number of business days' notice is your state's and this manual prints no national figure. Measuring and drawing your site explains what the marks mean.
  2. Look up your hardiness zone on the 2023 USDA map and write it in setup. It takes two minutes and it is the first filter on every plant you will consider.
  3. Measure the bed and put the two dimensions in setup, so the calculators and the plan arrive prefilled. Measuring and drawing your site has the method; for one bed it is a tape and five minutes.

Saturday morning: read the site

  1. Mark three spots along the bed with bricks or canes, and look at each at about 8, 10, 12, 2 and 4. Write down whether the sun is on it. The sun calculator totals the hours and names the band; Sun, shade and wind explains why the published scales disagree and which one this manual uses.
  2. Dig one wide hole about 10 inches deep, fill it with water, let it drain away, fill it again and note the depth and the time. Come back in an hour and measure again. The drainage calculator turns that into inches per hour and tells you whether the spot clears 48 hours, which is University of Minnesota Extension's criterion.
  3. Feel a handful of the soil from a few inches down: gritty is sandy, smooth and sticky is clayey, floury is silty. Write it on the site survey. Soil has the lab test too, which takes a week or two and is worth starting now even though it will not arrive this weekend.
  4. Dig to 12 inches in that hole and notice whether the spade meets a hard layer. If it does, read the compaction section before you plant anything, because the answer is usually to raise the bed rather than dig deeper.

By lunchtime you should have: an hours figure and a band for each spot, an inches-per-hour figure, a texture, and a note about depth. That is a site survey for one bed.

Saturday afternoon: choose and count

  1. Write your filters as one line: zone, band, soil, drainage. "5a, part sun, sandy and free-draining."
  2. Shortlist five plants that match all four, from a regional source rather than a national search: your extension service's plant database, a state recommended-species list, or a nursery that will answer questions. Choosing plants that fit the place has the order of the filters and why it matters.
  3. Record each one's mature height and spread in feet on the plant list. This is the step everything else depends on; a plant without those numbers cannot be drawn or counted.
  4. Count them by hand. Bed area divided by the square of the mature spread. A 12-by-4-foot bed is 48 square feet, so at 2 feet on center it holds twelve plants, not forty. Then check with the plant count calculator. Drawing the planting plan explains the convention this rests on.
  5. Draw it, on graph paper or with the site plan tool, with every plant as a circle at its mature spread. Adjust the list to the count, not the count to the list.
  6. If you want pollinators, add two free decisions: pick at least one plant from your ecoregion's keystone list, and mark a square foot of the bed as bare, undisturbed ground that will not be mulched. Native plants and pollinators has the reasoning, and about 70 percent of native bees nest in the ground.

Sunday: buy, plant, mulch, water

  1. Buy the number you counted, taking the plant list with you. A sale is not a reason to buy fifteen plants for a bed that holds eight.
  2. Work out the mulch with the mulch calculator: 2 to 3 inches for organic mulch, on Clemson Cooperative Extension's figures, minus the bare patch.
  3. Plant each one properly. Scrape the top of the root ball to find the root flare; dig the hole 2 to 3 times the ball's width and no deeper than the ball; set it on undug ground with the flare at or just above the surrounding soil; backfill with the soil that came out. Planting and the first three years has the detail and the reasons.
  4. Water in thoroughly, then mulch 2 to 3 inches, keeping it 2 to 3 inches clear of woody stems and leaving the bare patch bare.
  5. Write the date on the aftercare log and note when the interval changes: daily for the first fortnight, every 2 to 3 days to week 12, then weekly. That is University of Minnesota Extension's schedule, and week three is when people stop.

Done when: the bed is planted at mature spacing, mulched, watered, and the first watering date is written down.

Limits

Three things this page does not do. It does not tell you it is safe to dig; 811 does, and the marks are the only authority on that. It reads the site on one day in one season, which is a starting point: the winter re-check in Sun, shade and wind is the reading that catches the mistake. And it skips the soil lab test, which takes a week or two and tells you about pH and nutrients that no hole in the ground will. If this bed is against an older house, or if children will dig in it or food will grow in it, read the contamination section before you start rather than after.

What this page skipped, and when it matters

SkippedWhen you will want it
A written briefAs soon as more than one person has an opinion, or more than one use has to fit
A full base plan, the deed, easements and setbacksBefore anything near a boundary, and before anything you build
Roof runoff and slopeIf anything stands wet, or if the ground slopes where you walk
Use areas and bubble diagramsWhen you are laying out a whole yard rather than one bed
Hardscape sizes and what to hireThe moment anything hard, structural or electrical is involved
Phasing and quotesWhen the work is bigger than a weekend or somebody else is doing it